Display Udp Ipv6 Statistics - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
State

1.1.12 display udp ipv6 statistics

Syntax
display udp ipv6 statistics
View
Any view
Parameters
None
Description
Use the display udp ipv6 statistics command to display statistics of IPv6 UDP
packets.
You can use the reset udp ipv6 statistics command to clear statistics of all IPv6 UDP
packets.
Examples
# View statistics of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 10
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 21
Field
TCP connection status, including: Closed, Listening,
Syn_Sent, Syn_Rcvd, Established, Close_Wait, Fin_Wait1,
Closing, Last_Ack, Fin_Wait2, Time_Wait
Chapter 1 IPv6 Configuration Commands
Description
1-20