Display Ip Socket - H3C S3610 Series Command Manual

Command Manual – IP Address and Performance
H3C S3610&S5510 Series Ethernet Switches
Table 2-3 Description on the fields of the display icmp statistics command
bad formats
bad checksum
echo
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information request
mask requests
mask replies
information reply
time exceeded

2.1.5 display ip socket

Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: Type of socket, in the range of 1 to 3, corresponding to TCP, UDP and raw IP
respectively.
task-id: Identification of a task, ranging from 1 to 100
socket-id: Identification of a socket, ranging from 0 to 3072
Description
Use the display ip socket command to display socket information.
Field
Number of import packets of incorrect format.
Number of import packets of incorrect check sum.
Number of import/export packets answering request.
Number of packets with input/output destination
unreachable
Number
quenched.
Number of import/export packets to be redirected
Number of import/export packets echoing reply.
Number of import/export packets with incorrect
parameter
Number of import/export packets for time stamp
Number of import packets for information request
Number of import/export packets with mask request
Number of import/export packets for mask replies
Number of export packets for information reply
Number of import/export expiration packets
Chapter 2 IP Performance Configuration Commands
Description
of import/export
2-6
packets with source