Ip Address - H3C S3610 Series Command Manual

Command Manual – IP Address and Performance
H3C S3610&S5510 Series Ethernet Switches
If no interface is specified, the basic IP configuration information of all Layer 3
interfaces will be displayed.
Related command: display ip interface.
Example
# Display brief information about the basic IP configuration for VLAN interface 1.
<Sysname> display ip interface brief Vlan-interface 1
*down: administratively down
(s): spoofing
Interface
Vlan-interface1
Table 1-2 Description on the fields of the display ip interface brief command
Field
*down
(s)
Interface
Physical
Protocol

IP Address

1.1.3 ip address
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
View
Interface view
Parameter
ip-address: IP address of interface, in dotted decimal notation.
mask: Subnet mask in dotted decimal notation.
mask-length: Subnet mask length, the number of consecutive ones in the mask.
sub: Secondary IP address for the interface. The availability of this keyword varies by
device.
The interface is shut down with the shutdown command.
Spoofing attribute of the interface. It indicates that an interface
whose link layer is displayed up may have no link present or the link
is set up only on demand.
Interface name
Physical state of interface
Link layer state protocol of interface
IP address of interface (if no IP address is configured, "unassigned"
is displayed.)
1-4
Chapter 1 IP Address Configuration Commands
Physical Protocol
up up
Description
IP Address
192.168.0.36