Signal Intensity; Manual Setting; Volume Adjustment (Drc) - TechniSat TECHNIRADIO 5 IR Instruction Manual

8.2.6 Signal intensity

> Briefly press the Menu/Info button repeatedly until the signal strength bar is
displayed.
> The display shows the signal strength using a bar graph. The mark shows the
minimum signal strength.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. Readjust the telescopic antenna.

8.2.7 Manual setting

This menu item is used to check the reception channels and can be used to align the
antenna. Furthermore, stations can be added manually.
> Select Main Menu > Set Manually and press the Scroll&Select/Snooze knob.
> Select a channel (5A to 13F) using the Scroll&Select/Snooze knob. The signal
intensity will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed. The antenna can now
be aligned to the maximum signal intensity.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal.
If there are stations on the set frequency or channel that have not yet been
stored in the station list, they will now also be saved.

8.2.8 Volume adjustment (DRC)

With the Volume Adjustment menu item, the compression rate is set which balances
the dynamic variations and thereby the accompanying volume variations.
> Select Main Menu > Adjust Volume and press the Scroll&Select/Snooze
knob.
Minimum signal strength
Signal strength
DE
EN
NL
FR
PL
53