Programming Rhythm Sequence - Yamaha Electone EL-37 Owner's Manual

3.
Select the desired User rhythm number from the
LCD display by using the Page buttons, then select
the desired pattern variation with the appropriate
Data Control button.
USER 1-A USER 1-B¡U1
USER 1-C USER 1-D
Use these to select the User pattern variation.
PLAYING USER FILL IN PATTERNS:
You can play User Fill In patterns by selecting the desired User number and pressing the FILL IN button in the
Rhythm section on the panel.
Programming Rhythm Sequences
With the Rhythm Sequence Program, you can connect any of the Electone's existing rhythm patterns and the
rhythm patterns of your own creation together to make complete rhythm compositions. Four rhythm
compositions can be saved to the Sequence buttons on the panel for future recall.
To call up the Rhythm Sequence Program function:
1.
Press the SEQUENCE button in the RHYTHM
PROGRAM section.
RHYTHM
PROGRAM
SEQ.
PATTERN
1
SEQ.
3
SEQUENCE
The LED of the SEQUENCE button flashes
continuously throughout the operation.
The LEDs of the numbered Sequence buttons in the Rhythm section on the
panel will flash and the following display will prompt you to select a
sequence number.
<SEQ>
Select a Sequence.!!
RHYTHM
MARCH WALTZ SWING BOUNCE
SEQ.
2
USER 1 USER 2 USER 3 USER 4
TANGO LATIN 1 LATIN 2 8 BEAT
SEQ.
4
USER 5 USER 6 USER 7 USER 8
Use these to select
the User pattern number.
VOLUME
MAX
1
SLOW
ROCK
A B
16 BEAT 2
C D
MIN
instantly and automatically saved. This
means that if you select a sequence that
is already programmed, any editing you
do will permanently change the
sequence and the original sequence
cannot be recovered.
PAGE
When you select one of the
sequences in this step, any
NOTE
editing done to that sequence is
81