Copying A Rhythm Sequence; Saving Rhythm Pattern And Rhythm Sequence Data To A Usb Flash Drive - Yamaha STAGEA ELS-02 Owner's Manual

3
Set the control mode of the Footswitch
to RHYTHM STOP.
(See page 178 for information about the Footswitch
settings.)
4
Press the Left Footswitch with your
right foot to turn the sequence on.
Pressing the Left Footswitch again in the middle of
the sequence playback cancels the Rhythm
Sequence.
When you are playing a Rhythm Sequence that is
made up of several sequences (SEQ. buttons),
pressing the Left footswitch turns off the currently
playing Rhythm Sequence, and pressing it again
starts the next sequence.

Copying a Rhythm Sequence

You can copy a Rhythm Sequence stored on a sequence
button to another button. You can also add a Rhythm
Sequence to the end of another Rhythm Sequence.
1
Press the EDIT [COPY] or [ADD] button
in the Sequence Menu page.
The Copy From or Add From display appears.
NOTE
If you add a Rhythm Sequence to another Rhythm
Sequence that has an ending at the end, the section will
automatically change to MAIN A and the new sequence
will be added after the MAIN A part.
2
Select the number of the desired
Rhythm Sequence program to which
you want to copy or to which you want
to add.
A message appears prompting confirmation of
operation.
3
Press the [COPY] or [ADD] button to
copy or add the Rhythm Sequence.
Press [CANCEL] to abort the operation.
4
If necessary, edit the sequence.
Refer to the section "Editing an existing Rhythm
Sequence" on page 174 and/or "Editing an existing
Registration Sequence" on page 175.
Saving Rhythm Pattern and Rhythm Sequence Data to a USB
Saving Rhythm Pattern and
Rhythm Sequence Data to a
USB Flash Drive
You can save your own rhythm patterns (created in the
Rhythm Pattern Program) and Rhythm Sequences
(created in the Rhythm Sequence Program) to a USB
flash drive. Refer to the section "Saving Registrations and
Other Data to a Unit" on page 118 for instructions.
When loading your original Rhythm data from a USB
flash drive back to the Electone, be sure to stop the
rhythm if it is playing. Loading cannot be executed when
a rhythm is running.
ELS-02/ELS-02C Owner's Manual
10
177