Voice Condition; Vibrato - Yamaha Electone EL-37 Owner's Manual

Voice Condition Page 3
<LEAD>
ŒUSER VIB. ŒT.VIB.
5 -1
<UPPER>
ŒUSER VIB
5 -1

5 Vibrato

Vibrato is an effect that periodically, or regularly, varies the pitch of a
voice for a quavering sound. Used properly, it can make a voice sound
richer and more natural.
Call up the Vibrato and Touch Vibrato settings on Voice Condition Page 3
by using the Page buttons.
<LEAD>
ŒUSER VIB. ŒT.VIB.
5 -1
Press either of these buttons
to turn on User Vibrato.
5
-1 User Vibrato (USER VIB.)
When this is turned on, you can adjust the vibrato settings: Delay, Depth
and Speed for Lead voices, and Depth for Upper/Lower voices.
The Delay, Depth and Speed settings are set in the next page, Voice
Condition Page 3. The Delay, Depth and Speed settings are not displayed
and cannot be adjusted unless USER VIB. has been turned on in this
setting.
5
-2 Touch Vibrato (T. VIB) (Lead Voice only)
On/Off switch for the Touch Vibrato function. Touch Vibrato lets you
apply vibrato to individual notes as you play them. While playing a key,
press down harder on it to give the note vibrato. The harder you press
the key down, the greater the vibrato will be.
Call up the User Vibrato settings on Voice Condition Page 4 by using the
Page buttons.
¡3
5 -2
¡3
¡3
5 -2
Press either of these buttons
to turn on Touch Vibrato.
PAGE
The Pedal Condition display has
NOTE only two pages.
PAGE
Vibrato cannot be applied to the
NOTE Pedalboard voices.
The Delay, Depth and Speed
setting can be adjusted only
NOTE
when the User Vib. on the Voice
Condition Page 3 is turned on.
Only the Delay is available for the Upper
and Lower keyboard voices.
25