Yamaha Electone EL-37 Owner's Manual page 68

4.
To save the selected voice, press one of
the right DATA CONTROL buttons
corresponding to SAVE in the display.
The following display showing User voices 1– 4 appears.
To USER 1
5.
Select the User number to which you
wish to save the voice, and press the
corresponding DATA CONTROL button.
6.
The following display appears,
prompting you for confirmation of the
operation. Select "OK" to actually assign the
voice to the specific User number, or
"CANCEL" to abort the operation.
Save To USER 1
These select "OK"
When the voice has been assigned, a "Completed...!!" message
appears.
(10) Copy Protect
Some of the Disks available for the Electone are purposely
protected from being copied or erased. You cannot save the
data to another floppy disk. If you try to load data from such a
"copy-protected" disk to the Electone, a "Protected Disk" (Pr##)
message will appear on the LED display. The data cannot be
saved to the disk.
66
USER 2
USER 3 USER 4
[ OK ] [Cancel]
These select "Cancel"
If you eject the Voice Disk from the M.D.R., the voice
NOTE you assigned will be lost from the User number.