Yamaha Electone EL-37 Owner's Manual page 17

3.
Let's call up another display to see some of the
other uses of the Data Control buttons. Press the
PIANO button in the Upper Keyboard Voice section
once again (the same one you pressed in step #1
above) to call up the Voice Condition display for the
Piano voice.
STRINGS BRASS
ORGAN PIANO
The following display will appear:
<UPPER>
TOUCH=4
You can change two different settings of the voice from this display: the
touch and volume.
4.
First, let's change the volume value. Press the
left button in the bottom right Data Control button
pair (indicated below).
Notice that the value of the volume decreases each time you press the
button. Try also pressing the right button in this Data Control button pair
and notice that the value increases.
<UPPER>
TOUCH=4
5.
Next, we'll use the Page buttons. These buttons
are used to select (when available) the various
"pages" of the display, the numbers of which appear
at the top right of the LCD. Press Page [>] to select
page 2 shown below.
<UPPER>
FEET=PRE.EFFECT=PRE.
UPPER KEYBOARD VOICE
CLARI- SAXO- CHORUS HARMO-
NET PHONE NICA
GUITAR VIBRA- COSMIC TUTTI
PHONE
VOL.=24
VOL.=24
VOLUME
MAX
1
2
MIN
¡1
Pressing this button
decreases the value.
Pressing this button
increases the value.
¡1
Indicates the currently selected page.
¡2
PAGE
15