Yamaha Electone EL-37 Owner's Manual page 96

Page 3—Internal/External Control
<MIDI IN>LEAD=INT.¡3
SYNC=INT.EXP.=AUTO
2
These select
the Sync setting.
1 LEAD
Determines Internal or External control of the Lead Voices.
When set to Internal, Lead Voices are played from the Electone and the
sounds from a connected MIDI instrument can be played via MIDI
channel 1 (or channel 2, when the To Lower function is on). When set to
External, the Lead Voices can only be played from the connected
instrument via MIDI channel 4.
2 SYNC
Determines the source of the timing control, for rhythm synchronization
purposes. Setting this to Internal gives the Electone timing control over
the connected rhythm machine. This also allows you to start and stop the
rhythm patterns of the connected rhythm machine from the Electone's
panel controls. Setting this to External gives timing control to the
connected rhythm machine.
3 EXP. (Expression)
Determines the control of the expression functions. Ordinarily this control
is set to AUTO. However, when it is set to INT., you can manually control
the expression pedal during M.D.R. playback. When set to EXT., another
(external) Electone can be used to control the expression pedal functions.
94
INT.
1
EXT.
3
INT. AUTO
EXT. EXT.
INT.
These select the Lead setting.
These select the Expression
Pedal setting.
Accompaniment pattern sounds
cannot be controlled via MIDI.
NOTE