Yamaha Electone EL-37 Owner's Manual page 87

Cursor Controls on the Panel
RHYTHM
QUANTIZE
PROGRAM
PATTERN
3
SEQUENCE
Shifts the cursor to the beginning of the sequence.
Cursor Control with the Data Control Buttons
1 2
<PATTERN>
TYPE=1
3 4
1
Sift the cursor to the beginning of the sequence.
2
Sift the cursor to the end of the sequence.
3
Sift the cursor one step back.
4
Sift the cursor one step forward.
5.
Use the data controls on the panel (SET, INS., DEL.,
CLEAR) to enter or erase pattern numbers in the
pattern row.
RHYTHM
QUANTIZE
PROGRAM
PATTERN
3
SEQUENCE
Data Controls
1 RESET/USER
Determines the type of rhythm pattern, Preset or User. (See step #1 above.)
2 SET
For initially entering a pattern number to an empty position in the pattern
row, or for replacing a pattern at the cursor position. (See steps #2 and #3
above.)
Shifts the cursor back by 10 measures.
Shifts the cursor forward by 10 measures.
INSTRUMENT
CLEAR CHANGE 0 1
PRESET
3
0 5
USER SET
Shifts the cursor one step forward.
Shifts the cursor one step back.
Shifts the cursor to the end of sequence.
¡ACC.
VOL.=0
INSTRUMENT
CLEAR CHANGE 0 1
PRESET
3
0 5
USER SET
1 2
ACCENT
2 3 4
6 7 8
INS. DEL. CLEAR
1 2
3 4
ACCENT
2 3 4
6 7 8
INS. DEL. CLEAR
3 4 5
85