Effects; Tremolo/Chorus; Symphonic/Celeste - Yamaha Electone EL-37 Owner's Manual

Effects

The effects include the Tremolo, Symphonic, Delay and Flanger which should first be selected and turned on
for the specific voice section(s) on the Voice Condition page 2 above, and Reverb, Sustain and Guide.

1 Tremolo/Chorus

Tremolo recreates the rich, swirling sound of the popular rotating speaker effect. Just as with a conventional
rotating speaker, you can switch the effect on and off as you play. And like a motor-driven speaker, the
characteristic tremolo effect gradually changes speed after it is switched. The Tremolo effect can be switched in
real time as you play with the TREMOLO (FAST) button on the panel.
Tremolo Operation
1) Select TRM. (Tremolo) in each Voice Condition display page 2.
2) Turn on Tremolo as you play with the panel Tremolo button.
When TREMOLO (FAST) button is turned on while the TRM. is selected in
each Voice Condition display, the rotation effect is fast (Tremolo); when off,
it is slow (Chorus).

2 Symphonic/Celeste

Symphonic simulates the effect of a large ensemble, while Celeste creates the effect of a gradually expanding
sound.
Symphonic/Celeste Operation
1) Select SYM. (Symphonic) in each Voice Condition display Page 2.
<UPPER>
FEET=4'
2) Press the EFFECT button in the DISPLAY SELECT section, and call up
the Symphonic page 3 (Effect Page 3) by using the Page button. Select
Symphonic (or Celeste) by pressing any of the bottom Data Control
buttons.
<SYMPHONIC>
„Symphonic
Use any of these Data Control buttons
to select the Symphonic/Celeste settings.
¡2
EFFECT=SYM.
Selectng SYM. (Synphonic/Celeste) for
the selected voice section.
¡3
ŒCeleste
PAGE
27