Automatic Accompaniment-Auto Bass Chord - Yamaha Electone EL-37 Owner's Manual

2.
Once the Rhythm Condition Page 1 display
(above) has been called up, use the Page buttons to
select Page 2.
Rhythm Condition Page 2
<ACCOMPANIMENT>
TYPE=1
Selects the Accompaniment type.
1 TYPE (1-4)
These settings provide types of rhythmic and melodic accompaniment,
and become more complex according to the type number (Type 1 is the
simplest, Type 4 the most complex).
2 VOL. (Volume)
Determines the volume of the Accompaniment. The Accompaniment can
be turned off by setting this parameter to the minimum value. Range: 0-24
Automatic Accompaniment—Auto Bass Chord
The Auto Bass Chord (A.B.C.) function works with the Rhythm section of the Electone to automatically
produce chord and bass accompaniment as you play. It adds a entirely new dimension to your performance by
effectively putting a full backing band at your disposal. Depending on the feature or mode selected, you can
play anything from a single note to a full chord on the Lower key board and hear complete, rhythmical bass
and chord accompaniment.
To select the A.B.C. function and call up Rhythm Condition Page 3:
1.
Press any of the RHYTHM buttons twice to call
up the Rhythm Condition pages.
2.
Use the Page buttons to select Page 3, the
A.B.C. & Memory page.
Rhythm Condition Page 3
<ABC>
Fingered
OFF
Single
Fingered
Custom
These buttons correspond to the bottom left of the LCD and
let you step through the various A.B.C. modes.
36
1
<MEMORY>
ŒL
"
!
Sets volume to minimum value.
¡2
VOL.=0
2
Decreases volume.
¡3
ŒP
Turn the Lower keyboard Memory (L) on and off.
Sets volume to maximum value.
PAGE
Increases volume.
PAGE
Turn the Pedalboard Memory (P)
on and off.