Replacement Parts - Evenflo Triumph Owner's Manual

3
A
4
D
E
Note: Because of the fixed length of aircraft seat belts, the belt
buckle could be behind the child's back after tightening the
belt. For your child's comfort, Evenflo recommends cushioning
the child's back by placing a small pillow or folded-up blanket,
or a folded-up jacket, over the belt buckle.
Check your work. Reconnect the seat pad to the front
of the child restraint. Try to move the child restraint in all
directions. If you can move the restraint more than 25 mm
(1 inch) side to side or front to back at the forward-facing
belt path, the aircraft seat belt is not tight enough, and
you MUST install again until the seat belt is tight.
Fasten the aircraft seat
belt .
A
The aircraft seat belt must
be as tight as possible.
Route the excess aircraft
seat belt strap back
E
through the forward-
facing belt path D
opening, as shown above.
Using your full weight,
push the child restraint
firmly onto the aircraft
seat while pulling on the
excess seat belt strap to
tighten.
54
Not available on all models. Styles may vary.
To order replacement parts you can order on-line at www.
evenflo.com or contact Evenflo. When you contact us, please
have the product model number and date of manufacture (found
on the back of the child restraint).
1 Locking Clip:
Not included with
child restraint, see
5 Lower Anchor
page 18 or 28 Connector Assembly
6 Lower Anchor
Connector Assembly
2
Headrest
with Quick
Connectors™
Body Pillow
3
Seat Foam-Rgt
7
4 Tether Extender
8 Seat Foam-Lft
Proper Disposal of this Child Restraint
At the end of this child restraint's useful life, Evenflo
encourages you to dispose of it properly. Most of the
components in this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all plastic/foam parts and discard the rest.
If your local recycling center won't accept the padding,
you may dispose of it in the landfill.
Note: Evenflo uses recycled materials in the manufacturing
process whenever possible but never for components that are
critical for safety.

Replacement Parts

9 Seat Foam-Top
Seat Pad
bk
Cup Holder options
bl
55