Table of Contents
Advertisement
Forward-facing Installation
Using the Vehicle Seat Belt
1
The Intermediate Recline Position (Position #2)
and Full Upright Position (Position #3) are
for forward-facing use
bottom of the child restraint sits flat on the vehicle
seat.
Full Upright Position (Position #3)
Intermediate Recline Position (Position #2)
2
Adjust the recline to Positions #2 or #3 by lifting the
back of the seat slightly while pulling the ReclineRight
lever
.
A
ONLY
AND
always make sure the
The child must weigh
10 to 29.4 kg
(22 - 65 lb.).
The child must weigh
10 to 22.7 kg
(22 - 50 lb.).
A
26
WARNING
If the vehicle seat belts are not routed correctly,
the child restraint may not protect your child in a crash.
3
B
Route the vehicle seat belt
through the child restraint.
Use the BeltTrac access
flap
for easier seat belt
B
routing.
5
Lap Belt Only
Fasten the vehicle seat belt as shown depending on your
type of seat belt.
Note: Install locking clip on lap and shoulder belt
combinations, if necessary.
WARNING
DO NOT
allow the vehicle seat belt release button to touch
the child restraint. Accidental contact may cause the seat
belt to release. If necessary, turn the vehicle seat belt button
away from the child restraint or move the child restraint to
a different location.
4
Buckle the vehicle seat belt.
Lap and Shoulder
Belt Combination
27
Advertisement
Table of Contents
