Connecting To A Computer; Usb Connection - Yamaha 1009MWTO-F0 Owner's Manual

USB Connection

Connecting to a Computer

USB Connection
NOTE
the "DME Setup Manual" (PDF file)
• Refer to
• Make sure that the USB-MIDI Driver's THRU setting is "OFF."
USB connections can be used in the following two ways:
(1) Control the DME64N/24N from DME Designer.
(2) Connect to any individual DME64N/24N and control that DME64N/24N unit by transmitting MIDI com-
mands from a MIDI sequencer or similar software.
NOTE
• The computer on which DME Designer is running can be connected to either the group master or a slave DME series
unit.
• The correspondence between the MIDI commands to be received/transmitted and the scene parameters can be set up
using DME Designer.
• The USB port being used by DME Designer is not available for use by a MIDI sequencer or other application.
Be sure to follow the procedure below when you make a USB connection with a computer. Otherwise, the
computer and/or DME64N/24N may freeze, resulting in damages or loss of data. If the computer or
DME64N/24N freezes, turn the power to the DME64N/24N off and then on, then restart the computer.
CAUTION
22 DME64N/DME24N Owner's Manual
Device Group
Ethernet Cable
INPUT
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL DIGITAL MIXING ENGINE SATELLITE
USB
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL
INPUT
DME Satellite
• Before you connect the DME64N/24N to the computer via USB, cancel the computer's energy saving
mode (such as Suspend, Sleep, or Stand-by mode).
• Before turning on the power to the DME64N/24N, first connect its [USB] connector to the computer's
USB port.
• Before turning the power to the unit on or off, and before connecting or disconnecting the USB
cable, take the following actions:
- Quit all open applications.
- Make sure that the DME64N/24N is NOT transferring any data.
• Be sure to wait six seconds or more between turning the power to the unit on and then off (or off and
then on), or between connecting and disconnecting (or vice versa) the USB cable.
for details on installing USB-MIDI Driver and DME Designer.
USB Cable
INPUT
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL DIGITAL MIXING ENGINE SATELLITE
USB
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL
INPUT
DME Satellite
Ethernet Cable
Network Switch
Ethernet Cable
DME64N/24N
SCENE SCENE HOME HOME UTILITY UTILITY LEVEL LEVEL MUTE MUTE CANCEL CANCEL ENTER ENTER
USB Cable
Computer
(Running DME Designer.)
Computer
(Running MIDI
Sequencer or
similar application.)