Yamaha 1009MWTO-F0 Owner's Manual page 44

Utility Displays
Page Item
Slot
Card name
(no title)
Format
GPI
Reset
Max
Min
(no title)
HA
HA
WCLK
(no title)
Gain
+48V
(no title)
HPF
Frq
CASCAD
(DME64N
Head Margin
only)
Unit No.
Mixer I/O
Check Mode
44 DME64N/DME24N Owner's Manual
Displays info about an I/O card installed in a DME64N/24N I/O slot.
Displays the name of the installed card.
Resets the installed card.
Displays the audio format – 88.2 or 96 kHz.
GPI connector calibration and status display.
Resets the GPI calibration.
Sets the maximum calibration value.
Sets the minimum calibration value.
Current calibration status.
Current status and setup for the internal and connected external head amplifiers.
Current status and setup for head amplifier type.
Current status and setup for the word clock used by the head amplifier(s).
Displays the audio format 88.2/96 kHz.
Current status and setup for individual head amplifier channel gain.
Current status and setup for individual head amplifier channel phantom power supply (+48V
ON/OFF).
Displays current status of the master phantom power switch.
Current status and setup for individual head amplifier channel high-pass filter on/off.
Current status and setup for individual head amplifier channel high-pass filter frequency.
Displays current status for the [CASCADE] connectors.
Displays current status for the head margin of the audio signal handled via the [CASCADE]
connectors.
Displays how many devices the unit is from the beginning of the cascade chain.
Displays current status for the channels to be used for audio signals cascaded to a mixer.
Current status and setup for the thru connection.
Description Manual Page
Page 51
Page 51
Page 52
Page 53
Page 54