Table of Contents
Advertisement
Utility Displays
Head Amplifier Setup (HA) Page
Provides access to the head amplifier settings. Refer to
"REMOTE Connection" on page 28 for head amplifier
control signal connection.
NOTE
This page will not appear on the ICP1 display.
NOTE
Some scenes include head amplifier settings. In such
cases, the HA page settings will be saved along with the
scene when it is stored.
Internal Head Amplifier (DME24N only)
AD8HR
AD824
HA
Specifies the type of head amplifier to be set up. The
available options are AD8HR, AD824, and Built-in HA
(DME24N only). When the AD8HR and AD824 are
selected, a number indicating the connection order will
also appear.
Edit using the "List Parameters" editing procedure
described on page 38.
52
DME64N/DME24N Owner's Manual
WCLK (AD8HR/AD824 only)
Specifies the word clock signal to be used by the head
amplifier(s).
Available settings of the AD8HR are "D OUT A," "WCLK
IN," "INT44.1K," "INT48K," "INT88.2K," and "INT96K."
D OUT A:
Sets the word clock signal at the digital
input as the master clock of the AD8HR.
WCLK IN:
Sets the word clock signal at BNC
connector as the master clock of the AD8HR.
INT44.1K:
Sets the 44.1 kHz internal word clock as
the master clock of the AD8HR.
INT48K:
Sets the 48 kHz internal word clock as the
master clock of the AD8HR.
INT88.2K:
Sets the 88.2 kHz internal word clock as
the master clock of the AD8HR.
INT96K:
Sets the 96 kHz internal word clock as the
master clock of the AD8HR.
Available settings of the AD824 are "SLOT," "BNC,"
"INT44.1K," and "INT48K."
SLOT A:
Sets the word clock signal input via I/O
cards installed in the I/O slots as the master clock
of the AD824.
BNC:
Sets the word clock signal at the BNC
connector as the master clock of the AD824.
INT44.1K:
Sets the 44.1 kHz internal word clock as
the master clock of the AD824.
INT48K:
Sets the 48 kHz internal word clock as the
master clock of the AD824.
Format (AD8HR only)
Displays the 88.2/96 kHz audio signal transfer mode.
The input setting is on the left and the output setting is
on the right.
No Display (default):
transfer.
SP (Double Speed):
Allows direct transfer at 88.2
or 96 kHz.
CH (Double Channel):
transferred by using two 44.1/48 kHz channels to
transfer each audio channel of 88.2 and 96 kHz
respectively. The number of audio channels that
can be handled in this mode is half the number of
channels normally handled by the AD8HR.
Gain
Individually sets the gain of each head amplifier channel.
Edit using the "Numeric Parameters" editing procedure
described on page 36.
44.1/48 kHz audio signal
88.2 or 96 kHz audio is
Advertisement
Table of Contents
