4.3.3 Connecting Position and Direction of Expansion Cables
• The expansion cable is connected to the MIL connector of the expansion master unit
AFP7EXPM and the MIL connector on the IN side of the expansion slave unit AFP7EXPS.
• For adding the expansion block, remove the dummy connector on the OUT side of the
expansion slave unit AFP7EXPS, and connect the expansion cable to the MIL connector on
the IN side of the expansion slave unit AFP7EXPS in the block to be added.
• Connect the connector with the function earth wire to the MIL connector on the IN side of the
expansion slave unit AFP7EXPS.
• Do not use the expansion cable in the same raceway as other cables are placed.
(1)
(a)
(2)
(b)
5
(2)
(b)
(5)
(2)
(b)
(4)
(5)
(a)
Base block
(b)
Expansion block
(3)
(3)
(3)
Expansion
(1)
master unit
Expansion
(2)
slave unit
4.3 Wiring of Expansion Cable
(3)
Expansion cable
(4)
Dummy connector
Earth wire of
(5)
expansion cable
4-13