Fisher & Paykel HC60DCXB1 Installation Instructions Manual page 13

• Hang hood off upper hood mounting screws with 2 mm gap. Hang off the keyhole attachment points on the back
of the hood (see Fig.5). Tighten screws.
• Attach lower hood mounting screws to fix hood to wall.
• Reattach easy clean plate and filters.
5. Attach ducting
• Attach ducting to ducting adapter using aluminium duct tape and vent outside.
6. Attach chimney
• Bend the tabs on the chimney (A).
• Place chimney around the hood chassis and hang off the bracket (B).
• Extend the upper chimney and attach to the chimney bracket with 10 mm screws (C).
https://producthelp.fisherpaykel.com/nz/Cook/Rangehoods/Canopy/HC60DCXB1/User_Guide_HC60DCXB1/03_Installation_i...
Fig.5
Updated: Thu, 08 Oct 2020 05:42:05 GMT
Powered by
13