Initial Operation Of The On-Board Computer; Creating A User Id - Bosch Nyon Original Operating Instructions

Colour of the indicator
Red
Red + !
If the eBike battery is being charged on the bike, a corresponding notifica-
tion will be displayed.
If the on-board computer is removed from the holder (4), the state of charge
that was last displayed for the battery is saved.

Initial operation of the on-board computer

Before first use, remove the protective film from the display in order
u
to ensure the full functionality of the on-board computer. If the pro-
tective film remains on the display, this can impair the functionality/per-
formance of the on-board computer.
The full functionality of the on-board computer cannot be guaranteed
u
if the protective display film is used.
Nyon is supplied with a partially charged battery. Before first use, the Nyon
battery must be fully charged via the USB port or the eBike system.
When you switch on the on-board computer, you can set off after a short
period of time (about 4 seconds). During the subsequent period, the on-
board computer loads the complete operating system in the background.
Note: When switching on the on-board computer for the first time, the on-
board computer requires a longer period before it is ready for use.
If the on-board computer is connected to the Wi-Fi, the user is informed of
any new updates, where applicable. Download the update and install the
latest version.

Creating a User ID

To be able to use all functions of the on-board computer, you must register
online.
With a user ID, you can analyse your ride data, plan offline routes and trans-
fer these routes to the on-board computer.
Bosch eBike Systems
Explanation
The eBike battery is between 0 %
and 15 % charged.
The capacity for assisting the drive
has been used up, and assistance is
switched off. The remaining capacity
will be provided for the bike lights
and the on-board computer.
1 270 020 Nen | (31.08.2020)
English – 19