Replacing Ebike Components And The Lock Function; Activity Tracking; Eshift (Optional) - Bosch Nyon Original Operating Instructions

Replacing eBike Components and the Lock Function

Replacing the Smartphone
1. Install the eBike Connect app on the new smartphone.
2. Log in with the same account that was used to activate the Lock func-
tion.
3. Connect your smartphone with the on-board computer while the on-
board computer is attached.
4. The Lock function is displayed as set up and active in the eBike Connect
app.
Replacing the on-board computer
1. Connect your smartphone with the on-board computer while the on-
board computer is attached.
2. The Lock function is displayed as set up and active in the eBike Connect
app.
Replacing the drive unit
1. The Lock function is displayed as set up and deactivated in the eBike
Connect app.
2. Activate the Lock function by sliding the Lock function control to the
right.

Activity tracking

In order to record activities, you must be registered with and logged into the
eBike Connect portal or the eBike Connect app.
To record activities, you must consent to the storage of your location data in
the portal and/or in the app. Without this, your activities will not be shown in
the portal or the app. The position is recorded only if you are registered as a
user on the on-board computer.
Once synchronisation is complete, the activities will be displayed in the app
and in the portal whilst you are riding.

eShift (optional)

eShift is the integration of electronic gear-shifting systems into the eBike
system. The eShift components are electrically connected to the drive unit
by the manufacturer. The separate operating instructions describe how to
operate the electronic gear-shifting systems.
Bosch eBike Systems
English – 25
1 270 020 Nen | (31.08.2020)