Initial Operation Of The On-Board Computer; Registration At The On-Board Computer - Bosch Nyon Operating Instructions Manual

English – 18

Initial Operation of the On-board Computer

The battery pack is supplied partially charged. Before the first use, the
Nyon battery pack must be fully charged via the USB port (see "Energy sup-
ply of the on-board computer", page English – 30) or the eBike system.
In order to use all the features of the operating system, you must also reg-
ister online.

Registration at the On-board Computer

– Switch on the on-board computer using the On/Off button 5.
– Use the joystick 1 to select your preferred language (select by pressing
the joystick) and follow the instructions.
You have the following options to put Nyon into operation:
– "Test Ride"
You can perform a test ride without having to register in advance or to
enter data. After shutting down, all trip data will be deleted.
– "Start Demo"
A self-running sequence performs the main features of Nyon, including
Dashboard, Ride screen, Navigation, and Fitness screen. Several values
are simulated. The demo mode starts again after about 2.5 minutes and
can be terminated at any time by pressing any key.
– "Continue without account setup"
This is a very short registration process limited to Nyon. Offline means
in this case that your journey and user data are only saved locally on the
on-board computer. 
Follow the instructions and choose one of the suggested answers.
Entered data is kept after shutting Nyon down, but will not be synced to
the online portal or smartphone application.
When subsequently performing a complete registration, the data col-
lected up to that point is available for a limited time.
W 276 001 DPNen | (23.9.14) Bosch eBike Systems