Inserting And Removing The On-Board Computer (See Figures A-B) - Bosch Nyon Original Operating Instructions

English – 15
Inserting and removing the on-board computer
(see figures A–B)
To insert the on-board computer (5), first fit the lower part into the
holder (4) and then press it forward until you can feel the on-board com-
puter engage. Ensure that the on-board computer is firmly engaged.
To remove the on-board computer (5), press the release mechanism (9)
and remove the on-board computer upwards.
Remove the on-board computer when you park the eBike.
u
It is possible to block the release mechanism with a screw. To do so, remove
the holder (4) from the handlebars. Place the on-board computer in the
holder. Screw the enclosed locking screw (18) (M3 thread, 5 mm long) from
below into the thread provided in the holder. Fit the holder back onto the
handlebars.
Please note: The locking screw is not designed to prevent theft.
Bosch eBike Systems 1 270 020 Nen | (31.08.2020)