Maintenance And Servicing; Maintenance And Cleaning; After-Sales Service And Advice On Using Products; Transport - Bosch Nyon Original Operating Instructions

Maintenance and servicing

Deactivate the on-board computer if carrying out cleaning, mainten-
u
ance or service work on the holder or on-board computer. This is the
only way to avoid malfunctions/improper use.

Maintenance and cleaning

Do not clean any of the components with pressurised water.
Keep the screen of your on-board computer clean. Dirt can cause faulty
brightness detection.
Clean your on-board computer using a soft cloth dampened only with water.
Do not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a year (including
mechanical parts, up-to-dateness of system software).
In addition, the bicycle dealer may base the service date on the distance
travelled and/or on a period of time. In this case, the on-board computer dis-
plays a message telling you when the service date is due each time it is
switched on.
Please have your eBike serviced and repaired by an authorised bicycle
dealer.
Have all repairs performed only by an authorised bike dealer.
u

After-sales service and advice on using products

If you have any questions about the eBike system and its components, con-
tact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please visit
www.bosch-ebike.com.

Transport

If you transport your eBike attached to the outside of your car, e.g.
u
on a bike rack, remove the on-board computer and the eBike battery
to avoid damaging them.
Bosch eBike Systems
English – 65
1 270 020 Nen | (31.08.2020)