My Ebike> Menu Item; Shop> Menu Item - Bosch Nyon Original Operating Instructions

English – 57
<My eBike> menu item
When installing the app for the first time, a connection between the app and
the on-board computer is established via this menu item.
To do this, select <Add new eBike device> and follow the instructions.
Following successful pairing, the currently connected on-board computer
and the associated eBike components will be displayed.
The eBikes that have been connected with Kiox or Nyon are shown.
If the on-board computer has already been placed on at least two different
eBikes, they are displayed here for selection. Otherwise, it is not possible to
make a selection. The name assigned to each eBike can be changed, or an
eBike can be deleted from the selection list.
<Shop> Menu Item
If you are using Nyon, you have the option of expanding the functionality of
your on-board computer with the <Shop> menu item to include premium
functions.
<Custom riding modes>
Four different riding modes can be configured with this extension. This
means that, for each of the four riding modes, the assistance level of the mo-
tor support can be set depending on the speed at four points.
You can configure four different riding modes however you like.
When setting, five definable checkpoints or steps are available to you. For
the middle three points you can select any desired performance assistance
for a certain speed. For the left exterior point, only the performance assist-
ance can be changed (speed is fixed at 0 km/h). For the right exterior point,
only the maximum speed can be changed (performance assistance is fixed
Bosch eBike Systems 1 270 020 Nen | (31.08.2020)