Active Navigation - Bosch Nyon Original Operating Instructions

Table of Contents

Advertisement

n7
Button <Routes>
This displays the routes that have been saved in the portal, followed
by the synchronised routes.
n8
Button <POI>
Selecting this button means you can find destinations of general in-
terest, such as restaurants or shopping facilities.
n9
Button <Map Settings>
Selecting this button means you can change the map display or
manage your maps.
n10
<Recent Destinations>
This is where your recent routes and locations are listed.
A) Data from the app and the portal is used and displayed.
When you have entered the destination, you are then shown the fastest
route (<Fast>). Additionally, you can select the most scenic route (<Scen-
ic>) or the route for mountain bikes (<MTB>). Alternatively, you can opt to
be guided home (if you have entered your home address in the portal), se-
lect one of the recent destinations used, or choose from saved locations and
routes.
The battery's remaining range is calculated and displayed, taking into con-
sideration the topographical conditions. The calculation of the topographic
range extends to no more than 100 km.
If you have imported or planned GPX routes via the online portal, these will
be transferred to your Nyon via Bluetooth® or via a Wi-Fi connection. You can
start these routes when you wish. If you are near a route, you can have the
navigation system guide you to the starting point or you can start navigating
along the route immediately.
At temperatures below 0 °C, the elevation measurement is likely to deviate
significantly.

Active Navigation

The following figure shows an example active navigation with explanations of
the symbols depicted.
Bosch eBike Systems
English – 39
1 270 020 Nen | (31.08.2020)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bui350

Table of Contents