Bosch Nyon Operating Instructions Manual
Hide thumbs
Also See for Nyon:
- Owner's manual (97 pages) ,
- Original operating instructions (71 pages) ,
- Operating instructions manual (55 pages)
Related Manuals for Bosch Nyon
Summary of Contents for Bosch Nyon
- Page 1 Nyon operating instructions Online version en Original instructions 1 270 020 Wen (2016.05) T / 63...
-
Page 2: Table Of Contents
First steps ..........9 The “Nyon” operating system ........11 Premium features . - Page 3 “Bosch eBike Connect” ........
- Page 4 Disposal ........... 62 1 270 020 Wen | (13.5.16) Bosch eBike Systems...
-
Page 5: Safety Notes
When using a heart rate monitor the heart rate displayed may be distorted by electromagnetic interference. The heart rates displayed are for reference only. No liability can be accepted for consequences caused by incorrectly displayed heart rates. Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 6: Safety Warnings For Ebikes
Unauthorised opening of the drive unit will void warranty claims. Do not open Nyon. Opening Nyon can destroy it and void any warranty claims. All components mounted to the drive unit and all other components of the eBike drive (e. -
Page 7: Safety Information Relating To The Navigation System
Nyon is not a medical product. The values displayed in the “Fitness” operating mode may differ from the actual values. Use the Nyon on-board computer only with the associated operat- ing unit, which has its own joystick. -
Page 8: Congratulations
English – 8 Congratulations Congratulations on purchasing the first all-in-one eBike computer. Nyon is an eBike controller, navi and fitness trainer in one and also per- forms smartphone functions. – First all-in-one eBike on-board computer with separate operating unit – eBike, navigation, fitness and internet functions –... -
Page 9: First Steps
2 Button “Home” 3 On-board computer 4 Holder for on-board computer 5 On/Off button for on-board computer 6 Bike lights button 7 Brightness sensor 8 USB port 9 Protective cap of USB port Bosch eBike Systems 1 270 020 Wen | (13.5.16) - Page 10 13 Decrease assistance level button 14 Increase assistance level button 15 Holder for operating unit 16 Button push/start aid “WALK” 17 Lock latch for on-board computer 18 Locking screw for on-board computer 1 270 020 Wen | (13.5.16) Bosch eBike Systems...
-
Page 11: The "Nyon" Operating System
English – 11 The “Nyon” operating system The Nyon operating system consists of three components: – the Nyon on-board computer with operating unit – the smartphone application “Bosch eBike Connect” – the online portal “www.eBike-Connect.com” 14:30 km/h km/h SPORT ... -
Page 12: Premium Features
Purchase of “premium features” * GPS required Premium features The standard features of the “Nyon” operating system can be expanded via the App Store for Apple iPhones and Google Play Store for Android devices through the purchase of “premium features”. -
Page 13: Smartphone Compatibility
However, a complete compatibility of the on-board computer with the smartphones not listed, can not be guaranteed. Download the application “Bosch eBike Connect” to your smartphone from the App Store for Apple iPhones and Google Play Store for Android devices. -
Page 14: Operating Logic
Tip: If you are in an active operating mode, you can switch directly to the next operating mode by pressing the joystick 1 up or down. If Nyon is on the eBike, “Ride” is displayed after switching on the operating mode. If Nyon is not mounted on the eBike, “Dashboard” is displayed on the operating mode. -
Page 15: Main Menu
Map (OSM) over the web. You can navigate using these maps. “Fitness” Via this mode you can view various fitness-related information. “Settings” This operating mode allows you to set the basic configurations of your on-board computer. Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 16: Initial Operation
– Remove the on-board computer out of its holder. If no power is drawn from the drive for about 10 minutes (e.g. because the eBike is not moving) or no button is pressed on the Nyon, the eBike system will shut down automatically to save energy. -
Page 17: Inserting And Removing The On-Board Computer
To shut down the on-board computer press the On/Off button 5 for at least 1 second. If no button is pressed after 5 minutes, Nyon goes into power saving mode (back lighting off) and shuts down automatically after a further 5 minutes. -
Page 18: Power Supply Of External Devices Via Usb Connection
Initial Operation of the On-board Computer The battery pack is supplied partially charged. Before the first use, the Nyon battery pack must be fully charged via the USB port (see “Energy sup- ply of the on-board computer”, page English – 32) or the eBike system. -
Page 19: Registration At The On-Board Computer
Follow the instructions and choose one of the suggested answers. Entered data is kept after shutting Nyon down, but will not be synced to the online portal or smartphone application. If you subsequently undergo the complete registration process, the data collected up to that point is deleted, i.e. -
Page 20: Connecting A Heart Rate Monitor To Nyon
To check your heart rate, you can use a heart rate monitor, which you can connect to Nyon via Bluetooth®. Connect the heart rate monitor to your Nyon in the “Settings” menu under “Connections” using the “Heart Rate Monitor” menu item. When the menu item has been selected, your Nyon will automatically search for a device. -
Page 21: Operation
Daily kilometres travelled in the last 30 days Pushing the joystick 1 to the right allows the changes made in the portal or in your app to be synchronised with the Nyon. To do so, select the button. The following are synchronised: –... -
Page 22: Operating Mode "Ride
This option is a premium feature which can be activated by purchasing it. The settings of the configuration data are made using the “Bosch eBike Connect” application on a smartphone (see Menu item “Settings”, page English – 46).You can also enter settings for configu- ration data in the online portal. -
Page 23: Operating Mode "Map & Navigation
The map material suitable for the place of residence is installed by the bike dealer for the respective buyer. If required, additional maps can be down- loaded via your smartphone application “Bosch eBike Connect” and be transferred to your on-board computer. - Page 24 English – 24 When you switch on Nyon, it begins the satellite search to receive GPS signals. Once a sufficient number of satellite signals is found, the operating mode displays “Map & Navigation” on the map with the current location.
- Page 25 The basic remaining range of the battery can be extended by means of the “Topo operating range” premium feature. The “Topo operating range” feature then calculates and displays the battery’s remaining range, taking into consideration the topographical conditions. Bosch eBike Systems 1 270 020 Wen | (13.5.16)
- Page 26 If you have imported GPX routes via the online portal, these will be trans- ferred to your Nyon via Bluetooth® or via a WLAN connection. You can start these routes when you wish. If you are near a route, you can have the navi- gation system guide you to the starting point or you can start navigating along the route immediately.
-
Page 27: Operating Mode "Fitness
Current speed f8 Duration * When using a chest strap to measure the heart rate (not included in the delivery), your current heart rate will be displayed instead of the performance. Bosch eBike Systems 1 270 020 Wen | (13.5.16) - Page 28 – “Custom Screen” The settings of the configuration data are made using the “Bosch eBike Connect” application on a smartphone or via the online portal. – “Reset Trip” This option can be used to reset the trip meter, calories burned and all average values to “0”.
-
Page 29: Operating Mode "Settings
Under “Map Manager”, you can manage the maps installed on your Nyon, e. g. delete maps which are no longer required to free up storage space. Under “Auto Day/Night”, you can automatically change the map display depending on the ambient brightness. - Page 30 English – 30 – “My Profile”: Here you can also choose to display the active user. – “My eBike”: When Nyon is plugged in, you can change the pre-set value given by the manufacturer of the wheel circumference by ± 5 %.
-
Page 31: Status Display
Indicators already shown on the main screen will not be shown again. The position of the indicators may vary. If the on-board computer is taken out of its holder, the charging state of the Nyon battery of the on-board computer is displayed in place of the bike lights indicator. -
Page 32: Energy Supply Of The On-Board Computer
Nyon battery pack is powered by the eBike battery pack. If the on-board computer is removed from the holder 4, the energy is sup- plied via the Nyon battery pack. If the Nyon battery pack is weak, a warning message appears on the display. -
Page 33: Battery Charge-Control Indicator
The battery charge level indicator r10 (s7) displays the charge level of the eBike battery pack. The charge level of the Nyon battery pack can be read on the display s1. The charge level of the eBike battery pack can also be read on the LEDs on the eBike battery pack itself. -
Page 34: Setting The Assistance Level
– “TOUR”: Uniform assistance, for touring with long cruising range – “SPORT”: Powerful assistance for sportive riding off road as well as for urban traffic – “TURBO”: Maximum assistance, supporting highest cadence for sportive riding 1 270 020 Wen | (13.5.16) Bosch eBike Systems... - Page 35 * The motor output can vary for individual versions. When the on-board computer is removed from the holder 4, the last indi- cated assistance level is stored; the motor-output indicator r4 remains empty. Bosch eBike Systems 1 270 020 Wen | (13.5.16)
-
Page 36: Switching The Push-Assistance Mode On/Off
6. The illumination symbol s1 is displayed when the light is on. Switching the bike light on and off has no effect on the back lighting of the display. 1 270 020 Wen | (13.5.16) Bosch eBike Systems... -
Page 37: Eshift (Optional)
Then follow the instructions on the display. In the event of an error, it can also be necessary to perform calibration when riding. Confirm the calibration here too, and follow the instructions on the display. Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 38: Eshift With Sram Dd3 Pulse
If the eBike is brought to a stop from a speed of more than 10 km/h, the system may automatically shift down a gear to a set “Starting gear”. The “Starting gear” can be set under “My eBike”> “eShift (Shimano)”. 1 270 020 Wen | (13.5.16) Bosch eBike Systems... -
Page 39: Displays And Settings Of The Smartphone Application "Bosch Ebike Connect
English – 39 Displays and settings of the smartphone application “Bosch eBike Connect” A smartphone is not included in the delivery. To register with the smart- phone internet connection is required, which, depending on the contract, can generate costs at your telephone provider. For the synchronization of data between the smartphone and online portal an Internet connection is also required. -
Page 40: Activating The Application "Bosch Ebike Connect
English – 40 Activating the application “Bosch eBike Connect” In order to be able to use all features of your Nyon, it is necessary to have a smartphone with the “Bosch eBike Connect” application. Proceed as follows to perform activation: –... -
Page 41: Registration Via Smartphone And Bluetooth® Connection
“Fitness” operating mode. If the application “Bosch eBike Connect” is active and there is a Bluetooth® connection to your on-board computer, data between ... -
Page 42: Main Menu Of "Bosch Ebike Connect
English – 42 Main menu of “Bosch eBike Connect” Symbol Menu item Function “Dashboard” This operating mode displays various pieces of statistical data, the connection status and the synchro- nisation status. “Activities” Under this menu item you can view the trips you have made. -
Page 43: Menu Item "Dashboard
Menu item “Dashboard” Under this menu item, the current location of the bicycle on a map, the synchronisation status and the kilometres travelled in the last 30 days are displayed. Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 44: Menu Item "Activities
A “Ride” is complete: – When Nyon is shut down. – When Nyon is removed from the holder. – When a manual or automatic reset is performed. – “Days”: All the trips started on one day are summarised here. -
Page 45: Menu Item "Map
– Once you have selected your preferred route, you can transfer the route to your Nyon by pressing the button at the top right. There you can start navigation or just save the route for later. -
Page 46: Menu Item "Shop
– “My Profile”: The personal data collected by registration are contained here. These data can be adjusted, expanded and corrected here. If a Bluetooth® link or Nyon wi-fi link to the web exists, these data are auto- matically synchronised. Here you can also set up and edit your home address and your work address, set up your “Bosch eBike Connect”... - Page 47 (C). Save the view to complete the procedure. If there is an existing Bluetooth® connection, the view will then be automatically trans- ferred to the Nyon. “Custom Modes”: This setting option is available only if you have pur- chased it via the shop. ...
-
Page 48: Transferring The Maps To Nyon
If Nyon realises that it needs additional map material, it initially either searches for map material available locally in the main memory 22 of the Nyon or it searches for map material in the smartphone memory 23. If the required maps are not available, Nyon connects to the internet via the smartphone and automatically downloads the required map material from the internet into its cache memory 21. -
Page 49: Menu Item "Help
(). The map is then available for navigation. – Downloading the maps to Nyon: This function is available only when Nyon is connected to a WLAN net- work. For this reason, connect to a WLAN network () in order to have access to the internet. -
Page 50: Displays And Settings Of The Online Portal
Online registration Internet access is required for online registration. – Use your browser to open the “Bosch eBike Connect” online portal at “www.eBike-Connect.com”. – Read and accept the terms and conditions and the privacy policy. – Follow the instructions and complete the registration. According to the... -
Page 51: Online Portal Main Menu
This operating mode shows you the savings d4 you can make if you ride the bike instead of driving a car. Basis for the calculation is the average energy cost of fuel and electricity. Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 52: Menu Item "Activities
A “Ride” is complete: – When Nyon is shut down. – When Nyon is removed from the holder. – When a manual or automatic reset is performed. – “Days”: All the trips started on one day are summarised here. -
Page 53: Menu Item "Map
– Once you have selected your preferred route, you can transfer the route to your Nyon by pressing the button at the top right. There you can start navigation or just save the route for later. -
Page 54: Import Gpx Data
You can import GPX data over the online portal and save files up to 5 MB in size there (GPX 1.1 format). GPX data are transferred to Nyon as soon as Nyon is connected via the smartphone to the web over wi-fi or Bluetooth®. -
Page 55: Device Information
0 ... + 40 Protection type IP x7 (watertight) Supported wi-fi standards 802.11b/g/n (2.4 GHz) Weight, approx. 1) Not included as part of standard delivery 2) When USB cover is closed Bosch eBike Systems 1 270 020 Wen | (13.5.16) -
Page 56: Error Code Indication
Have connections and contacts among the components checked. Internal time-out error Restart the system. If the problem per- sists, contact your Bosch eBike dealer. Internal battery pack of Charge the on-board computer (in the the on-board computer holder or via the USB port). - Page 57 English – 57 Code Cause Corrective Measure Internal software error Restart the system. If the problem per- sists, contact your Bosch eBike dealer. Error at USB Remove the cable from the USB con- connection nection of the on-board computer. If the problem persists, contact your Bosch eBike dealer.
- Page 58 Bosch eBike dealer. Software version error Restart the system. If the problem per- sists, contact your Bosch eBike dealer. Authentication error Switch off the eBike system. Remove the battery pack and reinsert it. Restart the system. If the problem per- sists, contact your Bosch eBike dealer.
- Page 59 Restart the system. If the problem per- sists, contact your Bosch eBike dealer. Software version error Contact your Bosch eBike dealer so that he can perform a software update. Internal error of the ...
-
Page 60: Maintenance And Cleaning
After a short time, a temperature adjustment takes place and the fog disappears. Keep the screen of your Nyon clean. Dirt can cause faulty brightness detec- tion. The day/night switch-over in the navigation mode can be distorted. -
Page 61: After-Sales Service And Application Service
Please also observe the possibility of more detailed national regulations. In case of questions concerning transport of the battery packs, please refer to an authorised Bosch eBike dealer. The Bosch eBike dealers can also pro- vide suitable transport packaging. Bosch eBike Systems... -
Page 62: Disposal
Please return battery packs and on-board computers that are no longer usable to an authorised bicycle dealer. Li-ion: Please observe the instructions in section “Transport”, page English – 61. Subject to change without notice. 1 270 020 Wen | (13.5.16) Bosch eBike Systems... - Page 63 Robert Bosch GmbH Bosch eBike Systems 72703 Reutlingen GERMANY www.bosch-ebike.com 1 270 020 Wen (2016.05) T / 63...