Decay Level Vel (Decay Level Velocity); Rel1 Level; Attack Mode; Release Mode - Yamaha EX5 Owner's Manual

Decay Level Vel (Decay Level Velocity)

Increase or decrease the Decay Level with the
velocity.
Settings: –7~0~+7

Attack Mode

Selects the Attack Mode (1 or 2) or switches back
and forth between modes.
Settings: 1 (Attack Mode 1), 2 (Attack Mode 2)
More information about each mode is provided below.

Release Mode

Selects the Release Mode (1 or 2) or switches back
and forth between modes. When Release mode 2 is
selected, Release Time 2 and Release Level 2 (set at
"0") are added and an even more complex envelope
curve can be created.
Settings: 1 (Release Mode 1), 2 (Release Mode 2)
Attack Time
Sets the Attack Time.
Settings: 0~127

Dcy 1~3 Time (Decay 1-3 Time)

Sets the Decay 1-3 Time.
Settings: 0~127
Rel (Rel 1/2) Time
Sets the Release Time.
Settings: 0~127
You can set the Release 1/2 Time only when Release
Mode 2 is selected.
Init Level (Initial Level)
Sets the Initial level (when in "Hold mode").
Settings: 0~127
This parameter is effective only when the "Attack mode
1" is selected.

Dcy 1~3 Level

Sets the level of Decay 1-3.
Settings: 0~127

Rel1 Level

Sets the level of Release 1 (when in Release Mode 2)
Settings: 0~127
Release 1 Level is fixed to "0" in the Release Mode 1.
Release 2 Level is fixed to "0" in the Release Mode 2.
Setting the Amplitude Envelope Generator
There are six Time settings (the speeds of changes)
and seven Level settings that shape how the volume
of the sound changes over time, from when a key is
hit, then released, and how the sound decays.
Press [F8] to select the ENVELOPE screen. Here
each value can be set with the Envelope graphical
display.
There are two types of Attack Modes (1 and 2) for
the AEG. Attack Mode 1 has one attack and Attack
Mode 2 has a two-step attack. Select the Attack
Mode you want to use from the All Parameters
screen.
You can also set the desired values for the Time
Velocity and Time Scaling in the All Parameters
screen.
Attack Mode 1
Output
AL D1L D2L
AT D1T D2T
Key on
Initial Level = Attack Level
Output
AL D1L
Intial
Level
(255)
AT D1T D2T
Key on
Attack Mode 2
Output
AL D1L D2L D3L
AT D1T D2T
Key on
99
D3L R1L R2L
Time
D3T R1T R2T
Key off
D3L R1L R2L
D2L
Time
D3T R1T R2T
Key off
R1L R2L
Time
D3T R1T R2T
Key off