Yamaha EX5 Owner's Manual page 264

[F2]: SYN (Synth All)
Saves all of the internal voice and performance data
(265 voices and 128 performances) and the system data
as a single file. Sequence and sample data are not
included in "SYN" files.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
[F3]: VCE (Voice)
Saves the 256 voice data (excluding wave data) as a
single file. Sample data is not included in "VCE" files.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
[F4]: WAVE
Saves all of the wave and sample data as a single file.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
When the internal memory has been increased, a floppy
disk may not be able to accomodate the wave data. In
this case, you cannot save the data by dividing it into
several floppy disks. If necessary, install and use an
external SCSI data storage device.
File number/name (destination)
File number/name (destination)
File number/name (destination)
[F5]: SMF (MIDI File)
Saves the Sequence track (TR1~TR16) and Tempo
track data (created in the Song mode as song data) as a
Standard MIDI File (SMF). Data such as Play Effects
data is not included in a "SMF" file.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
When saving SMF file, all file types are displayed
and selectable at the file destination. Be aware that
you may inadvertently overwrite and erase your
important data!
[F6]: SONG
Saves all of the song data created in Song mode as a
single file. Data such as Play Effects data is included in
a Song file.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
[F7]: PTN (Pattern)
Saves all of the User pattern data created in Pattern
mode as a single file.
File type (source)
Device name/directory (destination)
Settings:
File number (destination)
Device name/directory (destination)
264
File number/name (destination)
File number/name (destination)
File number/name (destination)