3
InsEF1 (Insertion Effect 1)
Selects the type of effect for Insertion Effect 1.
Settings: 00 (thru)~24
For more information about each type of effect, see the
Effect Type List in the separate Data List book.
4
InsEF2 (Insertion Effect 2)
Selects the type of effect for Insertion Effect 2.
Settings: 00 (thru)~79
For more information about each type of effect, see the
Effect Type List in the separate Data List book.
5
Rev Send (Reverb Send)
Sets the send level of the signal output from
Insertion Effect 1/2 (or by-passed) and sent to the
Reverb unit.
Settings: 0~127
6
Cho Send (Chorus Send)
Sets the send level of the signal output from the
Insertion Effect 1/2 (or by-passed) and sent to the
Chorus unit.
Settings: 0~127
7
Rev (Reverb)
Selects the type of reverb for the Reverb unit.
Settings: 00 (off)~12
For more information about each type of Reverb, see the
Effect Type List in the separate Data List book.
8
Cho (Chorus)
Selects the type of chorus for the Chorus unit.
Settings: 00 (off)~17
For more information about each type of Chorus, see
the Effect Type List in the separate Data List book.
9
Cho Rev (Chorus Reverb)
Sets the send level of the signal output from the
Chorus unit and sent to the Reverb unit.
Settings: 0~127
)
Rev Pan (Reverb Pan)
Sets the panning of the signal output from the
Reverb unit.
Settings: L64 (far left)~cnt (center)~R63 (far right)
!
Cho Pan (Chorus Pan)
Sets the panning of the signal output from the
Chorus unit.
Settings: L64 (far left)~cnt (center)~R63 (far right)
@
Rev Return (Reverb Return)
Sets the return level of the signal output from the
Reverb unit.
Settings: 0~127
#
Cho Return (Chorus Return)
Sets the return level of the signal output from the
Chorus unit.
Settings: 0~127
[F5]: INS1 (Insertion 1)
Sets various parameters for the currently selected
Insertion 1 effect.
Currently selected effect type
Settings: (The number of parameters and values available
differs depending on the currently selected effect
type. For more information, see the Effect
Parameter List in the separate Data List book.)
[F6]: INS2 (Insertion 2)
Sets various parameters for the currently selected
Insertion 2 effect.
Currently selected effect type
Settings: (The number of parameters and values available
differs depending on the currently selected effect
type. For more information, see the Effect
Parameter List in the separate Data List book.)
106