Yamaha EX5 Owner's Manual page 144

Sample Bank
Selects the desired sample bank. A different bank
can be selected for each element.
Settings: PRE (Preset), RAM (DRAM), FLS (Flash
Memory)
FLS is effective only when an optional EXFLM1 is
mounted onto the EX5/5R/7.
Sample Number
Selects the desired sample number from the sample
bank. The category and sample name of the selected
sample number are displayed to the right of the
number. A different sample number can be selected
for each element.
Settings: For more information about each sample, see the
separate Data List book.
Coarse Tune
Adjusts the pitch of the sample for each element, in
semitones.
Settings: –64~+63
The setting exceeding the upper or lower limit of the
MIDI note number range (C–2~G8) is ineffective.
Fine Tune
Minutely adjusts the pitch of the sample of each
element.
Settings: –64~+63
Pitch EG VelSens (PEG Velocity Sensitivity)
Sets the velocity sensitivity for the PEG. With
positive values the harder a note is played, the
greater the change in pitch. Negative values will
produce the opposite effect.
Settings: –7~0~+7
Pitch EG Depth
Sets the amount of pitch change in the PEG. A
setting of "0" produces no change, and maintains the
original pitch.
Settings: 0~127
[F6]: WAVE
Selects the element samples (maximum 128) that form
a voice, and determines Loop related settings for each
sample. A different value can be set for each element.
Although the menu name, WAVE is used here for the
Drum Voice like the Normal Voice, the Drum Voice
directly selects a sample, not a wave.
Drum key
Drum Layer
Sample Bank
Sample Number
These are the same parameters as those explained
for the TUNE screen. See page 143.
Start Offset
Sets the offset value for the point where the sample
sound actually begins.
KeyOn
Start
Delay
Offset
Key on Start
(Top point: fixed)
Settings: 0~65535
Loop Length Offset
Sets the end point for the sample loop (see diagram,
above).
Settings: 0~65535
KeyOn Delay
Sets the amount of delay from when the key is
played until sound is produced.
Settings: 0~127
144
Loop
Length
Offset
Loop Length
Loop Top Loop End Data End
(End point)