Pattern Destination Data (To); Arpeggio Source Data (From); Arpeggio Destination Data (To) - Yamaha EX5 Owner's Manual

Pattern destination data (To)

The destination that can be selected will differ
depending on the setting designated in "From."
Settings:
Source data (From):
All Data
Pattern 1~50
[F8]: ARP (Arpeggio)
Loads an arpeggio file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in an arpeggio
file.
Device name/directory (source)
The type of destination data

Arpeggio source data (From)

(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. An arpeggio file (50 arpeggios)
can be loaded. Furthermore, one arpeggio can be
designated and loaded. In this case, only a specified
arpeggio number will be replaced with the newly
loaded data.

Arpeggio destination data (To)

The destination that can be selected will differ
depending on the setting designated in "From."
Settings:
Source data (From):
All Data
Arpeggio 51~100
Destination (To):
All Data
Pattern 1~50
File type and file number/name (source)
The type of source data
Destination (To):
All Data
Arpeggio 51~100
[F3]: RNAM (File Rename)
This operation renames a file in a disk.
Device name/directory (source)
File name to be changed (destination)
(If necessary, select a device beforehand) select the file
type and file number (name) you want to change, and
press [F7]: NAME to show the Name screen, then
input the new name. For more information on how to
name files, see page 263.
Once you input a file name, press [EXIT] to close the
Name screen and press [ENTER]. The confirmation
message "Rename File: Are you sure?" will be
displayed. Press [INC/YES] to execute the Rename
function or press [DEC/NO] to abort the operation.
A file can not be given a name that is identical to an
already existing file name.
[F4]: DEL (Delete)
This operation deletes a file in a disk.
Device name/directory
(If necessary, select a device beforehand) select the file
type and file number (name) to delete, and press
[ENTER]. The confirmation message "Delete File: Are
you sure?" will be displayed. Press [INC/YES] to
execute the Delete function, or press [DEC/NO] to
abort the operation.
268
File type and
file number/name (source)
File type and file number/name