[Pattern]; [F2:Job1] - Yamaha EX5 Owner's Manual

Music synthesizer / realtime control / extended synthesis / tone generator / realtime control / extended synthesis
Hide thumbs Also See for EX5:
Table of Contents

Advertisement

Press [JOB] key on the panel while in Pattern mode to
enter Pattern Job mode. When you enter the Pattern
Job mode, the following menu will be displayed. There
are 24 types of jobs in Pattern Job mode. The jobs are
divided into three groups JOB1~3. Press [F2] (JOB1),
[F3] (JOB2) or [F4] (JOB3) to select a menu. The
Undo/Redo function is assigned to [F7] which cancels
the changes you made in your most recent job
operation.
Steps for Executing a Job
1When in the Pattern Play mode, select the pattern
that you want to execute job operation.
2Press [JOB] to enter the Pattern Job mode.
3Press [F2] (JOB1), [F3] (JOB2) or [F4] (JOB3) to
select a menu. The selected menu will be displayed.
4Move the cursor to a job and press [ENTER]. The
selected job screen will be displayed.
You can also display each job by pressing [F1]~[F8]
while holding down [SHIFT].
5Move the cursor to a parameter and use the
[INC]/[DEC], Data Dial, numeric keypad, or the
Knobs 1~6 to set values.
Depending on the selected job it may not be necessary
to set values.
6Press [ENTER]. The following pop-up menu will
appear, prompting confirmation of the operation.
7Press [YES] to execute the job. "Completed!" will
momentarily appear in the screen indicating that the
job has been executed and the previous screen will
be displayed.
Press [NO] to cancel the job.
"Executing..." will appear when the Pattern Job takes
some time to execute. Take note that if the power is
turned off while "Executing..." is displayed, the data
may be destroyed.
8Press [EXIT] twice to exit the Pattern Job mode and
return to the Pattern Play mode.
[F2]: JOB1
Press [F2] (JOB1) and JOB1 menu will be displayed.
There are eight jobs that are executed in units of
patterns or respective tracks.
1. Copy Pattern (Copies all pattern data onto another
pattern.)
2. Clear Pattern (Clears all data from a pattern.)
3. Copy Track (Copies specific track data onto another
track.)
4. Clear Track (Clears all data from designated track.)
5. Mix Track (Mixes one track into another.)
6. Append Pattern (Appends one pattern to another.)
7. Split Pattern (Splits pattern into two patterns.)
8. Time Stretch (Expands or compresses timing over
designated range for specific track.)
228

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex5rEx7

Table of Contents