Restoring The Factory Set Data - Yamaha EX5 Owner's Manual

Restoring the Factory Set Data

In addition to the preset voices (which cannot be erased or overwritten), the EX5, EX5R, and EX7
come with a range of pre-programmed voices, performance setups, and other data in memory. If you
perform any operations that overwrite the data in memory (including system initialization, below),
the factory preset data will be lost. If at any time you want to restore the original factory preset data,
simply load the Factory Set file — file name: "FACTSET1/2/3/4.S1Y" — from the appropriate
Demonstration Disk via the Disk mode Load Synth All function (the same procedure described above
except for the file type selection [2. SYN, in this case] for loading the demo song files).
Loading the Factory Set data will overwrite any other data in the EX voice and performance memories!
Be sure to save any internal voices or performances setups you want toe keep to disk before loading the
Factory Set data.
Each of the Demonstration Disk contains different Factory Set files (their contents are the same except for the
voices numbered 1 through 32 in the Internal voice 1). Refer to the separate Data List book (Internal Voice 1)
and choose the disk which contains the appropriate file for your EX5, EX5R or EX7.
System Initialization
To completely erase all data in the EX internal memory and initialize the entire system, turn on the
power while holding the [EXIT] key.
System initialization will erase all data in the EX voice and performance memories! Be sure to save any
internal voices or performances setups you want to keep to disk before initializing the system.
F8 EXIT
Pressing...
CAUTION
ATTENTION
:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
POWER AC INLET
ON OFF
EX5/7
27
POWER
CANCEL
CURSOR
DATA
ON OFF
DEC NO INC YES
7 8 9
VWX YZ
or
4 5 6
TOP RE W F WD
MNO PQR STU
1 2 3
DEF GHI JKL
REC STOP PLAY ENTER
0
ABC SPACE
EX5R