5-1-3
HMI Clock
Not supported by the Soft-NA. Change the settings of the PC on which the Soft-NA is installed.
5-1-4
Reset HMI Device
Not supported by the Soft-NA.
5-1-5
IAGs
There are the following restrictions during the use of an IAG.
If an action, system variable, or function that cannot be used in the Soft-NA is used, an error occurs, but
if it is used in an IAG, an error does not occur in Sysmac Studio. These functions result in an error when
executed in the Soft-NA.
Before using an IAG in the Soft-NA, make sure the functionalities not supported in the Soft-NA are not
used.
NA-series Programmable Terminal Soft-NA User's Manual (V126)
5 Functionalities of Sysmac Studio
5
5 - 5