Safety - Vivotek ND8321N User Manual

Safety

 Connect the system to an earthed main power outlet.
 Never open the housing of the power supply unit.
 Install and operate the system only in a dry, weather-proof location.
 Observe the following safety factors:
Is there visible damage to the system or power cord
•
Is the system operating correctly.
•
Has the system been exposed to rain or moisture
•
Has the system been in a long storage under harsh conditions or exposed to
•
unconforming stress.
 The relevant electrical engineering regulations must be complied with at all times during
installation.
 Ensure that all maintenance and repair work is handled by qualified personnel such as
electrical engineers or network specialists.
 Read this manual before installing or operating the system. The documentation contains
important safety instructions about permitted uses.
 The rated AC input is: 100-240V~ 1.6A, 60-50Hz; the max. consumption: 60W (DC12V, 5A)
 If a fault occurs, disconnect the power cord from the power supply.
 Do not install the system close to heaters or other heat sources. Avoid locations with direct
sunlight.
 All ventilation openings must be not be blocked.
 Use only the cables shipped with system or use appropriate cables that can withstand elec-
tromagnetic interference.
VIVOTEK - Built with Reliability
User's Manual - 7