Table of Contents
Advertisement
Easy to Establish 3G/GPRS Network Applications
It is a big headache for engineers to establish the 3G/GPRS applications
because
the
GT-540P-3GWA-OEM1 and M2M RTU center software, the dynamic IP addresses
can be managed between them. The remote 3G/GPRS RTU product would connect
to M2M RTU Center automatically. Therefore, all remote 3G/GPRS RTU devices
can be managed by s single centralized M2M RTU Center software with a fixed IP
address. Moreover, there are M2M API tool and OPC server for engineers to develop
the 3G/GPRS applications by VB, VC or SCADA development tools conveniently
without any IP address management effort.
Active data transmission
The GT-540P-3GWA-OEM1 with active I/O transmission mechanism can
raise the communication. Unlike the traditional poll communication, it would
transfer the data by the defined time, DI trigger or AI hi/lo alarm. In addition to
improve the way of communication, that can also reduce the AP effort.
Transfer data by e-mail
Expect for the transferring data by the general communication with the
M2M RTU center, users can choose the e-mail mode to send these data by
e-mail over 3G/GPRS network in the fixed time.
Modbus RTU device connectivity
The GT-540P-3GWA-OEM1 is built-in Modbus RTU protocol. That can
make any Modbus RTU device connect to the GT-540P-3GWA-OEM1. By the
way of GT-540P-3GWA-OEM1, Modbus RTU devices can be used in
3G/GPRS remote system. The max Modbus RTU device can be connected to
the GT-540P-3GWA-OEM1 is three.
Simple Local I/O link Control
There are I/O built-in 3G/GPRS RTU devices of ICP DAS. Therefore,
these products can be the 3G/GPRS I/O devices. Expect for these local I/O
data can be sent to the host PC, the I/O link function of them help users to do
the simple control in local field. For example: the DI trigger or high/low AI
alarm can driver the DO channel.
Built-in I/O Data Logging
The GT-540P-3GWA-OEM1 provides an external mircro SD interface.
These local I/O and Modbus data are recorded in SD memory card for one
day in a single file.
GT-540P-3GWA-OEM1 user's manual, Version 1.0, 2013/03
dynamic
IP
management
GT-540P-3GWA-OEM1 user's manual v1.0
is
required.
Applying
the
3/52
Advertisement
Table of Contents
