Page 1
GTM-204M-4G Quick Start v1.0 2016/06 GTM-204M-4G Quick Start Product Check List The package includes the following items: One GTM-204M-4G hardware module One Quick Start (this manual) One companion CD One USB Type A to Type B connector cable (CA-USB18) ...
Page 2
GTM-204M-4G Quick Start v1.0 2016/06 Hardware Installation 3.1 View of the GTM-204M-4G Panel 3.2 Pin Assignments...
GTM-204M-4G Quick Start v1.0 2016/06 3.3 Installation 3.4 Reset Wire Connection Input Type Reset State ON Reset State OFF Reset Input Reset Input ON Voltage Level +3.5 V ~ +30 V OFF Voltage Level +1 V max.
Step 1: Double Click “GTM-204-4G USB driver V1.00.exe” to install the driver. Step 2: Click “Next” until finishing installation. Step 3: Connect the USB of GTM-204M-4G with the PC. Step 4: The “Found New Hardware Wizard” window will pop-out. Please click “Next” until finishing installation.
GTM-204M-4G Quick Start v1.0 2016/06 Quick Test Step 1: Start → All Programs → Accessories → Communications → Hyper Terminal → Input new connection name → Click “OK” → Select “GTM-204-4G AT command Port” for USB or your PC serial port for RS-232 communication → Click “OK”...
GTM-204M-4G Quick Start v1.0 2016/06 How to install GTM-203M-A Step 1: Step 2: Technical Support If you have problems about using the GTM-204M-4G, please contact ICP DAS product support. Email:Service@icpdas.com GTM-204M-4G website:http://m2m.icpdas.com/gtm-204m-4g.html...