Table of Contents
Advertisement
4.4.4
Modbus Device
The GT-540P-3GWA-OEM1 is allowed to connect to three Modbus RTU
devices. Therefore, users can get these data of Modbus devices form the remote site
by applying the GT-540P-3GWA-OEM1. The section is shown how to set the settings
to connect to the Modbus devices.
1. Adding a Modbus device in the GT-540P-3GWA-OEM1 Utility
Following these steps to add a Modbus device to the GT-540P-3GWA-OEM1
(1) Select "Modbus Device" in the left window and press the right button of
the mouse as the following figure.
(2) Select "Add Device" to add a Modbus device.
(3) There are Modbus device of ICP DAS for users to select. If the Modbus
device connected to GT-540P-3GWA-OEM1 is not in the list, please select
"Customer＂ item to add this Modbus device.
2. Remove a Modbus RTU device
Follow
these
GT-540P-3GWA-OEM1.
(1) Select the Modbus device that you want to remove and click the right
button of the mouse.
(2) Select "Delete Device" to remove this Modbus device
GT-540P-3GWA-OEM1 user's manual, Version 1.0, 2013/03
steps
to
remove
GT-540P-3GWA-OEM1 user's manual v1.0
a
Modbus
device
from
the
40/52
Advertisement
Table of Contents
