ICP DAS USA GT-540P-3GWA-OEM1 User Manual page 37

Item
Baudrate
Data Bit
Stop Bit
Parity Bit
4.4.2 DI/DO Info
(1) DI
Item
Type
Triggered Hold Time(sec)
Return Hold Time(sec)
GT-540P-3GWA-OEM1 user's manual, Version 1.0, 2013/03
Description
The baud rate of the COM2 (RS-485)
The data bit of the COM2
The stop bit of the COM2
The parity bit of the COM2
(none, odd, even)
Description
The function is used to set the type of DI
channel:
1. Disable : Disable the linkage function
between DI and DO channels.
2. DI NO : The DI channel is normal Open.
When the DI channel is close (high), it is
the trigger signal of
GT-540P-3GWA-OEM1.
3. DI NC:The DI channel is normal close.
When the DI channel is open (low), it is the
trigger signal in the system.
4. DI Counter: Set the DI channel as counter
mode.
This value represents the holding time of the
DI signal for triggering the event. The unit is
second.
(Range : 0 ~ 65535 sec)
When the trigger condition is activated, it
needs to keep the non-trigger status to be
triggered again according to the"Return
GT-540P-3GWA-OEM1 user's manual v1.0
35/52