Table of Contents
Advertisement
Condition 2
Alarm Value
Triggered Hold Time(sec)
Return Hold Time(sec)
DO Channel
DO On Time(sec)
DO Off Condition
GT-540P-3GWA-OEM1 user's manual, Version 1.0, 2013/03
GT-540P-3GWA-OEM1 user's manual v1.0
outputting when DO is output by AI trigger.
1. Disable: Disable the DO linkage with AI
channel.
2. Time: The DO output would keeping
outputting according to the "DO on Time"
when AI alarm is triggered.
3. Input Status: The DO channel output would
be kept contiguously according to the time of
the "Return Hold Time" when the AI returns
to the non-trigger status
The second condition of AI trigger. The trigger
modes are as condition 1.
The alarm value of AI channel
(Range : 0 ~ 20 mA)
This value represents the holding time of the AI
signal for triggering the event. The unit is
second.
(Range : 0 ~ 65535 sec)
When the trigger condition is activated, it needs
to keep the non-trigger status to be triggered
again according to the "Return Hold Time＂.
The unit is second.
(Range : 0 ~ 65535 sec)
The DO channel will be activated according to
the AI alarm.
(Channel 0 ~ 1)
The DO channel would keep outputting by this
time, when AI alarm is triggered and "DO Off
Condition＂ is "time＂. The unit is second.
(Range : 0 ~ 65535 sec)
These conditions of the DO terminating
outputting when DO is output by AI trigger.
1. Disable: Disable the DO linkage with AI
channel.
2. Time: The DO output would keeping
outputting according to the "DO on Time"
when AI alarm is triggered.
3. Input Status: The DO channel output would
38/52
Advertisement
Table of Contents
