Thermo Scientific Nicolet iS50 GC-IR User Manual page 32

iS50 GC-IR Module
30 iS50 GC-IR Module User Guide
Table 9. iS50 GC-IR Touch Point settings
Option
Auto Report
Default experiment
4. Select an appropriate experiment in the "Experiments Using: GC" pane.
5. Set the Touch Point Setup options as desired.
6. If you want to overwrite the default settings without overwriting the default experiment,
choose Set Default.
7. Choose Save.
8. Choose Experiment Setup at the bottom of Touch Point Setup.
9. In Experiment Setup, select the Series tab.
Description
Can be used to automatically display, print or save an auto
report of the analysis results. For more information, find
"Working with Auto Reports" in OMNIC Help Topics.
Note: These settings apply only to single spectra collected as an
.spa or .spg file. The settings are available for GC-IR
applications but not typically used since most GC-IR
experiments collect a series of spectra over a period of time and
save them in a series (.srs) file.
The following options are available:
• Preview. Displays the auto report after the analysis is
completed.
• Print. Prints the auto report after the analysis is
completed.
• Add to current notebook. Adds the report to the current
notebook. For more information, find "Adding a Report
to a Notebook" in OMNIC Help Topics.
Shows the file name of the default experiment for the selected
sample location.
Thermo Scientific