Switching On The Pellet Stove; On Thecontrol Panel; Via Infrared Remote Control (If Present); Changing/Selecting The Power Level - Austro Flamm Ben User Instructions

english

4.5. Switching on the pellet stove

4 . 5 .1 . O n t h ec ont ro l pan e l
T ap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
Keep pressed (see below):
The system displays the following screens:
4 . 5 .2 . V i a i nf r ared re m ot e co nt ro l ( if p re se nt )
As-standard, models Polly 2.0 and Percy are fitted with an infrared remote control; this is available as an
accessory for the Polly light and Percy light models.
ON/OFF
Output +
Output -
Figure 10: Infrared remote control (description of buttons)
Make sure that you there is an unobstructed line of sight between the remote control and the control
panel.
Figure 11: Infrared remote control (operating angle)

4.6. Changing/selecting the power level

On the control panel, you can set five different power levels.
68
Target temperature +
Target temperature -