Seat Heater And Seat Ventilation; Method For Heating Seat - Komatsu WA480-8 Operation & Maintenance Manual

ATTACHMENTS AND OPTIONS

SEAT HEATER AND SEAT VENTILATION

(only machine with three-point seat belt)
• Using the heater for a long time may cause low temperature burn (blister, etc.).
• Do not put a heavy luggage on the cushion. Do not stick the cushion with needles, nails, etc.
• Do not put a blanket, cushion, or other heat-retaining material on the seat cushion. Doing so may
cause overheat.
• If water or beverage, etc. spills on the seat cushion, immediately wipe it off with soft cloth, etc., and
dry out the seat cushion before using it.
REMARK
• The seat heater and the ventilation cannot be used at the same time.
• The seat heater has no timer function and is not turned off automatically. Be sure to turn off the seat heater
switch immediately after using the heater.

METHOD FOR HEATING SEAT

1.
Set the seat heater and ventilation selector switch (1) to
the seat heater position (a).
2.
Set the air flow control switch (2) to HIGH position (d) or
LOW position (e).
The heater in the seat cushion operates, and the seat
cushion and backrest become warm.
(c) OFF position
The seat heater stops.
(d) HIGH position
The seat heater operates.
(e) LOW position
The seat heater operates.
REMARK
The temperature of the seat does not change even if the
air flow control switch (2) is in either HIGH position (d) or
LOW position (e).
3.
Turn the air flow control switch (2) to OFF position (c)
when the temperature of the cushion becomes suitable.
The heater in the seat cushion stops.
k k
CAUTION
SEAT HEATER AND SEAT VENTILATION
6-11