Komatsu WA480-8 Operation & Maintenance Manual page 36

SAFETY LABELS
Prohibition of entering beneath work equipment
"09807-C0883"
• Sign indicates a crush hazard from falling off of working de-
vice.
• Keep away when the working device is raised.
Caution for modification of ROPS
"09620-A2001"
"09620-A3001"
• If any modification is applied to the ROPS or FOPS, it may
affect the strength and may not comply with the standard.
Do not drill, cut or weld on the ROPS or FOPS structure.
Any modification is prohibited.
• ROPS or FOPS may provide less protection if it has been structurally damaged or involved roll-over. Con-
sult Komatsu Distributor in that case.
• Always wear seat belt when moving.
Prohibition of start by short-circuiting
"09842-A0642"
• Start the engine only while sitting on the operator's seat.
• Do not attempt to start the engine by shot-circuiting the en-
gine starting circuit. Such an act may cause a serious per-
sonal injury or fire.
2-10
SAFETY