Table of Contents
Advertisement
MAINTENANCE
NOTICE
•
Check each pulley for damage, wear of the V-groove, and the wear of the V-belt. In particular, be
sure to check that the V-belt is not touching the bottom of the V-groove.
•
Replace the belt with a new one if the belt is stretched and has no allowance for adjustment, or
has slipping sound or squeak because of cuts or cracks of the belt.
•
When the new V-belt is installed, readjust it after operating for 1 hour.
METHOD FOR CHECKING LOOSENESS OF WHEEL HUB BOLTS, RETIGHTEN-
ING BOLTS
Loosening of wheel hub bolt (1) accelerates the wear of the tires and causes accidents.
1.
Check the bolt for loosening and tighten it further if neces-
sary.
Always turn the bolts in the direction of tightening.
Tightening torque: 824 to 1030 Nm {84 to 105 kgm}
2.
If the bolt is broken, replace all of the bolts of the wheel.
METHOD FOR CLEANING AIR CONDITIONER RECIRC AIR FILTER
When using conditioner fresh air filter, there is a danger that dirt may scatter and cause personal injury.
Always wear protective equipment such as protective eyeglasses and dust mask.
1.
Loosen knob (1) and tilt the top of filter inspection cover (2)
together with the filter.
2.
Remove cover (2) and filter together in the direction of the
arrow.
3.
Remove the filter from cover (2).
4.
Clean it by using compressed air as you did for the fresh
air filter.
Replace the filter with a new one when the dirt clogging
the filter cannot be removed by blowing air or every year.
5.
When installing the filter, fit it to cover (2) first.
Insert the filter and cover (2) together between the filter
box and the floor mat from a diagonally upper position.
6.
Tighten the knob aligning it with the knob installation position.
REMARK
If the filter becomes clogged, the air flow will be reduced, and there will be a rumbling sound from the air
conditioner unit.
k
k
WARNING
MAINTENANCE PROCEDURE
4-47
- Quick Links:
- Controls and Gauges Names
Hide quick links:
Advertisement
Chapters
Table of Contents
