Komatsu WA480-8 Operation & Maintenance Manual page 229

OPERATION
2.
Check the reservoir tank.
Check that the coolant level is between FULL and LOW
marks of the reservoir tank.
3.
If the coolant level is low, add coolant to FULL level
through the coolant filler port of the reservoir tank.
4.
After refilling with coolant, tighten the cap securely.
If the reservoir tank is empty, leakage of coolant should be
suspected. After checking, repair any abnormality immedi-
ately.
If no abnormality is found, check the level of the coolant in
the radiator. If it is low, add coolant of the same density in
radiator according to the COOLANT density table in
"METHOD FOR USING FUEL, COOLANT AND LUBRI-
CANTS ACCORDING TO AMBIENT TEMPERATURE",
then add coolant to the reservoir tank.
If coolant is added more than usual, check for coolant
leakage.
Check that there is no abnormality such as oil in the cool-
ant.
METHOD FOR CHECKING OIL LEVEL IN ENGINE OIL PAN, ADDING OIL
Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn injury.
Wait for the temperature to go down, and then start the work.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
3-161