Download Print this page
Displays2go IPPROEVRF User Manual

Displays2go IPPROEVRF User Manual

Advertisement

Quick Links

User Manual
Thank you for ordering 2-in-1 floor and table tablet kiosk stand. Let's start setting it up!
Parts you will find
Aluminium Plate
Bended tube
Acrylic Cover
Long Screw"a" 8pcs
Short Screw"b" 4pcs
Flat end Screw"c" 4pcs
Acrylic Corner
Screwdriver
hexagon end 1pc
Before assembling please prepare the extension cable if you want power routing
through stand. Cable not included
Step1
Base and Straight Tube Connection
Please remember to insert cable when install if need power routing.
Locate the pole as above picture
The lock point face to the handle
Base & Pole upside down
Straight tube
Base
Spline end 1pc
4pcs Flat end screws"c" to tighten
and insert cable
Turn and put on floor
Counter clockwise tightening the screw
using Hex end screwdriver
Step2 Straight Tube and Bended Tube Connection
Insert the bended tube Remember Counter clockwise tightening
feed the cable to the bended tube
the screws of both sides using Hex end screwdriver
Step3
Connect the Aluminium Plate to
the Bended Tube using 4pcs Screw "b"
using Spline end screwdriver
Counter clockwise tightening
the screw of another side
Ready for next step
Step4
Connect 4pcs Acrylic corners to
the Aluminium Plate using 4pcs Screw"a"
Corner A at A position,
Corner B at B position,
Corner C at C position,
Do not fully tighten all
screws!
Need to adjust in next step.

Advertisement

loading
Need help?

Need help?

Do you have a question about the IPPROEVRF and is the answer not in the manual?

Questions and answers

Summary of Contents for Displays2go IPPROEVRF

  • Page 1 User Manual Thank you for ordering 2-in-1 floor and table tablet kiosk stand. Let’s start setting it up! Parts you will find Aluminium Plate Bended tube Straight tube Turn and put on floor Counter clockwise tightening the screw Counter clockwise tightening using Hex end screwdriver the screw of another side Step2 Straight Tube and Bended Tube Connection...
  • Page 2 Kensington Security Slot Step5 Add your Tablet PC and add the Acrylic cover using 4pcs Screw "a". Fully tighten all screws after installed all parts correctly. A Kensington Security Slot can be found on the stand at the bottom of bended tube and straight tube. A Universal Computer Security Cable can be attached to this slot to add an extra theft deterrent.