Related Manuals for Displays2go NAVIGATOR Series
Summary of Contents for Displays2go NAVIGATOR Series
- Page 1 IPAD IPAD ENCLOSURE ENCLOSURE AND FLOOR AND FLOOR STAND STAND User Manual User Manual SKUs: Navigator Series SKUs: Navigator Series...
- Page 3 10: EVA Foam Furniture Pads (Not Pictured) ............4 1 1. Phillips Head Screws (Not Pictured) ..............8 TOOLS REQUIRED: Phillips Head Screwdriver If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
- Page 4 1. Before attaching base to the stand body, press furniture pads to the bottom of the base. Then, attach base to the stand by affixing 8 screws through the pre-drilled holes. 2. Unlock the cover and attach the iPad enclosure to the top of the stand by unscrewing provided screws and then re-attaching in desired orientation.
- Page 5 3. Carefully place iPad inside the enclosure, as shown. 4. Connect the charging cable to the iPad. This will feed down the stand and will plug in near the base (see step 5). Then, close the cover and securely lock the enclosure.
- Page 6 5. Open the door at the back of the stand. Plug the power adapter into the fixed power strip. 6. Close and lock the door.
- Page 7 Enjoy your new Navigator iPad Enjoy your new Navigator iPad Stand! Stand! CONTACT INFORMATION: www.displays2go.com PHONE: 844-221-3388...
Need help?
Do you have a question about the NAVIGATOR Series and is the answer not in the manual?
Questions and answers